Rhino Rack Roof Rack - RRRSB05B

Replace a damaged crossbar or add another bar to your existing roof rack with this half kit. Crossbar mounts to your vehicle's raised, factory side rails. Includes 2 legs and 1 black, lightweight aluminum Vortex StealthBar.

Features:

• Half kit lets you replace a damaged crossbar or add another bar to an existing rack on your roof with raised, factory side rails
  • Requires strap and lock fit kit for installation (sold separately)

• Slim, elliptical crossbar creates an extremely aerodynamic system
• Flush design - bar sits between side rails to create an ultra-low-profile roof rack
  • Crossbar only raises roof rack profile 1-3/8" above factory side rails

• Top channel lets you add channel-mounted carriers and accessories
  • Clamp-on accessories can also be mounted to the bar

• Rubberized Vortex strips in top channel dramatically reduces drag and wind noise
  • Keep dirt and grime out of crossbar
  • Provide cushioning and slip resistance for your cargo

• Versatile bar has 3-15/16" of side to side adjustability
  • Lets you reposition bar to accommodate carriers and accessories that require different crossbar spreads

• Arched design complements the curves and lines of your roof
• Lightweight, structural-grade anodized aluminum bar is rustproof
  • Internal H-shaped extrusion provides exceptional bar strength

• UV-treated, glass-reinforced nylon legs are weather resistant
• Half kit includes 1 crossbar and 2 legs
• Matte black finish

Specs:

• Rack weight capacity: 176 lbs
  • Always observe your vehicle's maximum roof load capacity
• Minimum crossbar spread: 27-9/16"
• Crossbar dimensions: 37-15/16" long x 3-1/8" wide x 1-3/16" tall
• Limited lifetime warranty

This single Rhino-Rack Vortex StealthBar lets you replace a damaged crossbar or add another crossbar to your existing roof rack to help distribute the weight of a load on your roof. The crossbar mounts directly to your vehicle's raised, factory side rails with rubber-coated stainless steel straps (sold separately). The Vortex StealthBar has built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. This bar blends seamlessly with the support legs to provide a from-the-factory look, and it is custom cut to your specific vehicle.

Aerodynamic Design

The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds.

The Vortex StealthBar crossbar has a flush-mount design so it terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.

Strong, Durable Construction

The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round.

The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.

Custom Fit for Easy Installation

The crossbar arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit (sold separately).

Channel-Mounted and Clamp-On Accessories

The crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.

You can also attach most clamp-on accessories to the bar, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on it.

Built-In Security

Locking covers on each support leg let you secure accessories mounted in the crossbar's top channel. These sturdy nylon covers give the crossbar a finished look and also secure it to your vehicle's roof. The cover locks (sold separately) are keyed a like, so a single key opens all locks.

RSB05B Rhino-Rack Vortex StealthBar Load Bar - Raised, Factory Side Rails - Aluminum - 38" Long - Black

Installation Details